====== Kniwwelino ======

===== API =====
==== String getID() ====
returns the Kniwwelinos Device ID = last 6 digits of the WIFI MAC address

==== String getName() ====
returns the Kniwwelinos Device Name = Kniwwelino + last 6 digits of the WIFI MAC address

==== String getMAC() ====
returns the Kniwwelinos WIFI MAC address

==== String getIP() ====
returns the Kniwwelinos WIFI IP address

==== boolean isConnected() ====
Checks the Kniwwelinos Wifi and MQTT connection.

returns true if connected, false if not connected

==== void sleep(uint16_t sleepMillis) ====
Sleeps the current program for the given number of milliseconds. 
Use this one instead of arduino delay, as it handles Wifi and MQTT in the background. 

''sleepMillis = milliseconds to sleep.''

==== void loop() ====
internal loop that handles the mqtt connection and message handling.

Needs to be called regularly -> end of the Arduino loop method.
	
==== void PINsetEffect(uint8_t pin, int effect) ====
Set the specified I/O Pin of the board to on/off/blink/flash.

''pin = D5/D6/D7\\
effect = RGB_ON/RGB_BLINK/RGB_FLASH/RGB_OFF''

==== void PINclear(uint8_t pin) ====
Clear the specified I/O Pin of the board. (set to OFF and remove from ticker)

''pin = D5/D6/D7''

===== Wiring =====

===== Examples =====