RGB LED

Set the RGB LED of the board to show the given color.

col = color to show as String in format #FF00FF first 2 digits specify the RED, second the GREEN, third the BLUE component.

Set the RGB LED of the board to show the given color and effect.

col = color to show as String in format #FF00FF first 2 digits specify the RED, second the GREEN, third the BLUE component.
effect = on of RGB_ON/RGB_BLINK/RGB_FLASH/RGB_OFF
count = how long shall the effect be shown. (10 = 1sec, -1 shows forever.)

Set the RGB LED of the board to show the given color.

col = color to show as 32 bit int.

Set the RGB LED of the board to show the given color.

col = color to show as 32 bit int.
effect = on of RGB_ON/RGB_BLINK/RGB_FLASH/RGB_OFF
count = how long shall the effect be shown. (10 = 1sec, -1 shows forever.)

Set the RGB LED of the board to show the given color

red = RED color component (0-255)
green = GREEN color component (0-255)
blue = BLUE color component (0-255)

Set the RGB LED of the board to show the given color and effect.

red = RED color component (0-255)
green = GREEN color component (0-255)
blue = BLUE color component (0-255)
effect = on of RGB_ON/RGB_BLINK/RGB_FLASH/RGB_OFF
count = how long shall the effect be shown. (10 = 1sec, -1 shows forever.)

Set the RGB LED of the board to be OFF

Set the Brightness of the RGB LED of the board.

b = brightness from 0-255

  • en/reference/rgb.txt
  • Last modified: 2018/01/23 13:06
  • by kniwwelino