Seite anzeigenÄltere VersionenLinks hierherNach oben Diese Seite ist nicht editierbar. Sie können den Quelltext sehen, jedoch nicht verändern. Kontaktieren Sie den Administrator, wenn Sie glauben, dass hier ein Fehler vorliegt. FIXME **Diese Seite wurde noch nicht vollständig übersetzt. Bitte helfen Sie bei der Übersetzung.**\\ //(diesen Absatz entfernen, wenn die Übersetzung abgeschlossen wurde)// ====== Kniwwelino Blockly am Mac installieren ====== These instructions where provided by the community member Samir El Ouardi. Thanks for your contribution. To install the OSX version of the [[en:introduction#visual_programming_with_kniwwelino_blockly|KniwwelinoBlockly]]: * Download [[https://www.arduino.cc/en/Main/Software|latest Arduino IDE]] launch it after installation. * Configure Arduino like described in the [[en:installationArduino]] section * Download the [[https://blog.sengotta.net/signed-mac-os-driver-for-winchiphead-ch340-serial-bridge/|driver]] for the USB serial Converter used on the Kniwwelino board and install it. * Download [[https://www.python.org/downloads/|Python 3]]. We tested against version 3.6.3, any other Python 3 should work also. * Download the {{:en:download:kniwwelinoblockly_osx_linux_20180316.zip | latest release of KniwwelinoBlockly}}. Un-zip the archive file. * Go to the KniwwelinoBlockly folder * Get info (cmd+i) on the file **start.py** and set with Python Launcher {{ :en:installation:info_python.png?nolink&400 |}} * Double click start.py to start KniwwelinoBlockly * This will launch a terminal window for python and the webbrowser displaying KniwwelinoBlockly * Change the settings of KniwwelinoBlockly * Arduino Compiler Location (normally): **/Applications/Arduino.app/Contents/MacOS/Arduino** * Arduino Board: **Kniwwelino** * COM Port (Kniwwelino must be connected to the Mac before opening the settings): port is named like **/dev/cu.wchusbserial1410** {{ :en:installation:kniwwelinoblockly_settings.png?nolink&800 |}} * Select language of your choice. de/installationmac.txt Zuletzt geändert: 2018/03/16 10:36von kniwwelino Anmelden