Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
en:preparation [2019/05/21 11:36]
kniwwelino
en:preparation [2020/01/09 12:55]
kniwwelino
Line 2: Line 2:
  
 Before you can start to program your Kniwwelino you have to do a few preparations,​ explained in the following. Before you can start to program your Kniwwelino you have to do a few preparations,​ explained in the following.
 +
 +{{youtube>​aXBIXZKhTv8?​medium}}
 +
 \\ \\
 ==== Plug your Kniwwelino ==== ==== Plug your Kniwwelino ====
Line 18: Line 21:
  
 <callout type="​danger"​ icon="​true">​ Be aware that Kniwwelino is only able to connect to open, WEP or WPA/WPA2 networks! <callout type="​danger"​ icon="​true">​ Be aware that Kniwwelino is only able to connect to open, WEP or WPA/WPA2 networks!
-\\WPA2 Enterprise like eduroam is not supported!+ 
 +WPA2 Enterprise like eduroam is not supported!
 </​callout>​ </​callout>​
  
-1. Press button B while starting the Kniwwelino. +1. Press and hold button B, then start (plug) the Kniwwelino.
- +
-{{:​en:​buttonb.png?​300|}} +
- +
-OR (in case you have an older version): At the start of the Kniwwelino, press both buttons simultaneously+
  
-{{:en:connectwifi1.png?200|}} +{{:en:buttonb2.png?300|}}
  
-The LED blinks purple, and the Matrix says "WIFI AP".+The LED blinks purple, and the Matrix says "WIFI AP:" ​followed by a code.
  
 2. Use your smartphone (or tablet or computer) to connect to the Network "​Kniwwelino_<​ID Nr>"​. 2. Use your smartphone (or tablet or computer) to connect to the Network "​Kniwwelino_<​ID Nr>"​.
Line 35: Line 35:
 {{:​en:​connectwifi2.jpg?​200|}} {{:​en:​connectwifi2.jpg?​200|}}
  
-3. Open a new window with your web browser and go to the address: http://​192.168.4.1 ​+3. On the **same, ​new connected device**: open a web browser and type the address: ​''​http://​192.168.4.1''​
 The following screen will show: The following screen will show:
  
Line 50: Line 50:
 Before you can start coding, you need to add your Kniwwelino to the list of Kniwwelino boards in your settings. To do so, please follow these steps: Before you can start coding, you need to add your Kniwwelino to the list of Kniwwelino boards in your settings. To do so, please follow these steps:
  
-1. Start (unplug ​and plug again) your Kniwwelino ​while holding button A pressed. A pattern will show up on the LED matrix.+1. Press and hold button A, then start (plug) your Kniwwelino. ​ 
 + 
 +{{:​en:​buttona.png?​300|}} 
 + 
 +A pattern will show up on the LED matrix.
  
 {{:​en:​setup1.jpg?​300|}} {{:​en:​setup1.jpg?​300|}}
Line 59: Line 63:
  
  
-3. A window for managing your boards will open. Define a name for your Kniwwelino, for instance "​Kniwwelino 1". In case you own several Kniwwelinos,​ you might want to label your Kniwwelino with this same name (or number).+3. A window for managing your boards will open. Copy the pattern of the LED matrix onto the Kniwwelino ​in the window.
  
-{{:en:setup3.jpg?300|}}+{{:en:setup4.jpg?300|}}
  
-4. Copy the pattern of the LED matrix onto the Kniwwelino in the window. 
  
-{{:en:setup4.jpg?300|}}+4. Define a name for your Kniwwelino, for instance "​Kniwwelino 1". In case you own several Kniwwelinos,​ you might want to label your Kniwwelino with this same name (or number). 
 + 
 +{{:en:setup3.jpg?300|}} 
  
 5. Click on the green +. The Kniwwelino now appears in the list. 5. Click on the green +. The Kniwwelino now appears in the list.
Line 74: Line 80:
  
 \\ \\
 +
 ==== Optional: Setting up alternative ways to program Kniwwelino ==== ==== Optional: Setting up alternative ways to program Kniwwelino ====
 //If your are planning to program your Kniwwelino online with the visual programming tool, you can skip these following steps.// //If your are planning to program your Kniwwelino online with the visual programming tool, you can skip these following steps.//
 +
 +=== Programming Kniwwelino with the Kniwwelino Flashtool ===
 +If you have trouble to connect your Kniwwelino board to a WiFi network, then you can programm it with the Kniwwelino Flashtool.
 +  * [[en:​preparation:​flashtoolinstall]]
 +  * [[en:​preparation:​flashtool]]
 +
 +\\
  
 === Install Kniwwelino Blockly on your Computer === === Install Kniwwelino Blockly on your Computer ===
 To be able to program your Kniwwelino offline, you have to install a driver for the microcontroller as well as the software on your computer, described hereafter: To be able to program your Kniwwelino offline, you have to install a driver for the microcontroller as well as the software on your computer, described hereafter:
  
-   * [[en:​installation]] +   * [[en:​installation]] ​(deprecated,​ new version will come soon) 
-   * [[en:​installationMac]]+   * [[en:​installationMac]] ​(deprecated,​ new version will come soon)
  
 \\ \\