Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
en:extensions:exti2csensor [2018/03/28 14:16]
kniwwelino [BME-680]
en:extensions:exti2csensor [2018/10/10 08:50] (current)
kniwwelino [ADPS9960]
Line 21: Line 21:
  
 ===== Supported Sensors ===== ===== Supported Sensors =====
 +If you add your own I2C sensors, please note that the LED matrix chip is using the address 0x70.
 ==== BME-280 ==== ==== BME-280 ====
   * ** Available Values:​**  ​   * ** Available Values:​**  ​
Line 29: Line 29:
     * Height in m     * Height in m
   * **Used Library:** Adafruit BME280 Library 1.0.7 https://​github.com/​adafruit/​Adafruit_BME280_Library   * **Used Library:** Adafruit BME280 Library 1.0.7 https://​github.com/​adafruit/​Adafruit_BME280_Library
-  * **I2C Address:** 0x76+  * **I2C Address:** **0x76** [0x76, 0x77]
  
 ==== BME-680 ==== ==== BME-680 ====
Line 39: Line 39:
     * Gas: volatile organic compounds (VOC) in Ohm     * Gas: volatile organic compounds (VOC) in Ohm
   * **Used Library:** Adafruit BME680 Library 1.0.5 https://​github.com/​adafruit/​Adafruit_BME680   * **Used Library:** Adafruit BME680 Library 1.0.5 https://​github.com/​adafruit/​Adafruit_BME680
-  * **I2C Address:** 0x77 [0x76, 0x77]+  * **I2C Address:** **0x77** [0x76, 0x77]
   *    * 
 ==== SHT-30 ==== ==== SHT-30 ====
Line 46: Line 46:
     * Humidity in %     * Humidity in %
   * **Used Library:** Modified WEMOS SHT30 library: https://​github.com/​derFrickler/​WEMOS_SHT3x_Arduino_Library   * **Used Library:** Modified WEMOS SHT30 library: https://​github.com/​derFrickler/​WEMOS_SHT3x_Arduino_Library
-  * **I2C Address:** 0x45+  * **I2C Address:** **0x45**  [0x44, 0x45]
   *    * 
 ==== BH1750 ==== ==== BH1750 ====
   * ** Available Values:​**  ​   * ** Available Values:​**  ​
-    * Light Level in lux+    * Light Level in lux [0-65535]
   * **Used Library:** BH1750 Library 1.1.3 https://​github.com/​claws/​BH1750   * **Used Library:** BH1750 Library 1.1.3 https://​github.com/​claws/​BH1750
-  * **I2C Address:** 0x23+  * **I2C Address:** **0x23** [0x23, 0x5c]
  
 ==== ADPS9960 ==== ==== ADPS9960 ====
   * ** Available Values:​**  ​   * ** Available Values:​**  ​
-    * Proximity 0=far to 255=near +    * Proximity: numeric value, ​0=far to 255=near 
-    * Gesture ​UP=DOWN=2 LEFT=3 RIGHT=4 +    * Gesture: numeric value, ​1=UP 2=DOWN 3=LEFT 4=RIGHT 
-    * Light Components for White Red Green Blue+    * Light Components for White Red Green Blue: numeric value, 0-65536 but mostly in the range of 0-100
   * **Used Library:** Modified Adafruit_APDS9960 library: https://​github.com/​derFrickler/​Adafruit_APDS9960   * **Used Library:** Modified Adafruit_APDS9960 library: https://​github.com/​derFrickler/​Adafruit_APDS9960
-  * **I2C Address:** 0x39+  * **I2C Address:** **0x39**
  
 ===== Programming the i2c Sensors ===== ===== Programming the i2c Sensors =====